Skip to content
Auveco No. 17686 Blade Type Mini Fuse Tap, Quantity - 50

Car-Pak J06470 Replaced By Auveco 17686 Blade Type Mini Fuse Tap, Quantity - 50

OEM Part Number: Car-Pak J06470

Price: $12.48

See Ordering Options

Product Information

Quantity: 50
Type: Tap - Mini (ATM) Fuses
Used With: Auveco 8781 or 12159
Made In: USA

Mini Fuse Blade Type Fuse Tap
For tapping “hot side” of mini fuse type fuse block

“Tapping” fuse blocks equipped with Mini® Fuses are no Problem! Now there’s a quick, easy alternative to direct wiring for tapping the “hot side” of mini fuse style fuse blocks. The blade type fuse tap is made of .016” thick sturdy brass with a .187” (3/16”) wide tab. It is engineered for quick connect and disconnect of accessories.

Installation can be complete in 3 steps:
  1. Locate “hot side” of circuit in fuseblock with a test probe. Slide the tap onto corresponding “hot side” blade of fuse.
  2. Insert the fuse into the fuse block
  3. Crimp one end of an in-line fuse holder (with the fuse installed) to the appropriate Auveco female connector or 12159 (22-the other fuse holder lead to the accessory Slide the female connector onto protruding tab of the tap.

OEM Cross Reference

Car-Pak: J06470




California Prop 65

WARNING: This product can expose you to chemicals including Vinyl Chloride, which is known to the State of California to cause Cancer. For more information go to www.P65Warnings.ca.gov.