Skip to content
Auveco No. 14474 Hot Side Tap Clip For Blade Type Fuses, Quantity - 25

Car-Pak J05862 Replaced By Auveco 14474 Hot Side Tap Clip For Blade Type Fuses, Quantity - 25

OEM Part Number: Car-Pak J05862

Price: $9.01

See Ordering Options

Product Information

Quantity: 25
Type: Tap - ATC/ATO Fuses
Used With: Auveco 8781 or 12159
Made In: USA

Blade Type Fuse Tap
A quick, easy alternative to direct wiring when tapping the “hot side” of the fuse block.

The blade type fuse tap is made of sturdy brass and is engineered for quick connect and disconnect of accessories such as C.B. radios, hand-held lights, etc.

Installation can be completed in three steps:
  1. Use a test probe to locate the “hot side” of the circuit in the fuse block. Then snap the tap over the corresponding “hot side” blade of the fuse. Insert the fuse into the fuse block.
  2. Crimp one end of an in-line fuse holder (with the fuse installed) to a fully insulated nylon .250” female quick-connect terminal. Attach the other fuse holder lead to the accessory wire.
  3. Complete the connection by sliding the female quick-connect terminal onto protruding tab of the tap.

OEM Cross Reference

Car-Pak: J05862




California Prop 65

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause Reproductive Risk & Cancer. For more information go to www.P65Warnings.ca.gov.